NEC SV Series - CloudPBX

The NEC SV8100 has been tested and approved for CloudPBX SIP Trunking with Cloud Kinnekt.

The below is the basic programming required for the use with the CloudPBX Trunk.

WARNING: SIP ALG IS REQUIRED TO FIX NEC's NAT ISSUES

P: 10-28

01: Enter 103.112.104.XXX

03: UDP

04: Username as per CloudPBX Portal (SV8100 Only)

05: IP Address or Hostname (hostname is recommended)

P: 10-29

01: Enable

02: Enable

03: Enter 103.112.104.XXX

04: 5060

05: Manual

06: Enter 103.112.104.XXX

07: 5060

14: Default

15: Enter 120

16: Make sure this is un-ticked

Program 10-30

**Not Used in SV9100, SV2100

02: Username as per CloudPBX Portal

03: Password as per CloudPBX Portal

P: 10-36

02: Username as per CloudPBX Portal

03: Password as per CloudPBX Portal

P: 84-10

RTP/RTCP: Diffserve = 46

SIP Trunk: Diffserve = 40

P: 84-13

Set all Maximum Audio Frame Size to 20ms

P: 84-14

06: 5060

09: TO Header

11: Proxy Domain Server

15: Use Opposite Settings

19: 5

20: Remove PING

P: 26-01

01: Tick ARS Service

P: 26-02 - P1

Enter as per table

P: 26-02 - P2

Enter as per table

P: 26-02 - P3

Enter as per table

P: 44-05 - Table 1

Enter as per table

P: 44-05 - Table 2

Enter as per table

P: 44-05 - Table 3

Enter as per table

P: 44-05 - Table 4

Enter as per table

P: 21-19

Per Extension, in E164 format