Caller ID

The caller's name and number displayed here are sent to the party you call and are shown on their UAD/Phone display.

The information you see here is taken from the extension number and user name.

To set different Caller ID information, please go to 'Enhanced services: Caller ID' and set new information there

Set Caller ID: Enable 'Caller ID' service (ex. Set this option to 'Yes' to enable the Caller ID service)

Caller ID: Extension Number and Name that are displayed on dialed party UAD/Phone display (ex. These options are read-only. Caller ID information can be changed only through 'Enhanced Services')

Caller ID Presentation: The way Caller ID is sent by the Extension. If CloudPBX MT is connected to a third-party software and there are problems with passing the Caller ID information to it, applying different 'Caller ID Presentation' methods should sort out the problem (ex. Presentation Allowed, Not Screened)

Hide CallerID for Anonymous calls: When you set this option to Yes, incoming calls with Anonymous as number but have CallerID set, are then formatted as Anonymous <anonymous>.

Ringtone for Local calls (Extension to Extension) If you know which phone is registered on this extension, you can set a custom ring tone for local calls.(ex. If your phone is SPA941 you could set <Simple-2>)

Ringtone for Transferred calls: Ringtone for transfered calls, work same as Ringtone for local calls setting. Depending of your phone manufacturer you can send a string to the phone in order to use different ringtone than the one set on device. Once this string is set in Ringtone for transfered calls field (as well as in your device itself) it will be used for all calls that are transfered to your extension.

Only Allow Trunk CallerID within DID range: When you assign an extension to a customer and assign some DIDs to it, customer can make calls through that extension with CallerIDs that match its DID numbers. If a customer tries to make a call with a CallerID that doesn't match any of the DIDs assigned to him, the caller ID will be reset to Anonymous.

Trust Remote-Party-ID: Defines whether CloudPBX allow Remote-Party-ID header

Send Remote-Party-ID: Should 'Remote-Party-ID' be added to uri.

Options:

        • Use Remote-Party-Id - Use the "Remote-Party-ID" header to send the identity of the remote party

        • Use P-Asserted-Identity - Use the "P-Asserted-Identity" header to send the identity of the remote party

        • Connected Line Updates:

This option is particularly useful as with some providers, if Use PAI is enabled, calls might start dropping short time after update is sent. Setting Connected Line Updates to No will prevent these call drops.

RPID with SIP UPDATE: In certain cases, the only method by which a connected line change may be immediately transmitted is with a SIP UPDATE request. If communicating with another Asterisk server, and you wish to be able transmit such UPDATE messages to it, then you must enable this option. Otherwise, we will have to wait until we can send a reinvite to transmit the information.